Bart/bullet3
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

add additional demos/examples for MultiBody and Constraints

Browse Source
This commit is contained in:
erwin coumans
2015-04-22 13:02:27 -07:00
parent 13396d32bf
commit f2aef6b73e
9 changed files with 1368 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

150
examples/Constraints/ConstraintPhysicsSetup.cpp Normal file
View File

@@ -0,0 +1,150 @@
#include "ConstraintPhysicsSetup.h"
#include "../CommonInterfaces/CommonRigidBodyBase.h"
#include "../CommonInterfaces/CommonParameterInterface.h"
struct ConstraintPhysicsSetup : public CommonRigidBodyBase
{
ConstraintPhysicsSetup(struct GUIHelperInterface* helper);
virtual ~ConstraintPhysicsSetup();
virtual void initPhysics();
virtual void stepSimulation(float deltaTime);
};
ConstraintPhysicsSetup::ConstraintPhysicsSetup(struct GUIHelperInterface* helper)
:CommonRigidBodyBase(helper)
{
}
ConstraintPhysicsSetup::~ConstraintPhysicsSetup()
{
}
static btScalar val;
static btScalar targetVel=0;
static btScalar maxImpulse=10000;
static btHingeAccumulatedAngleConstraint* spDoorHinge=0;
static btScalar actualHingeVelocity=0.f;
static btVector3 btAxisA(0,1,0);
void ConstraintPhysicsSetup::stepSimulation(float deltaTime)
{
val=spDoorHinge->getAccumulatedHingeAngle()*SIMD_DEGS_PER_RAD;
if (m_dynamicsWorld)
{
spDoorHinge->enableAngularMotor(true,targetVel,maxImpulse);
m_dynamicsWorld->stepSimulation(deltaTime,10,1./240.);
btHingeConstraint* hinge = spDoorHinge;
if (hinge)
{
const btRigidBody& bodyA = hinge->getRigidBodyA();
const btRigidBody& bodyB = hinge->getRigidBodyB();
btTransform trA = bodyA.getWorldTransform();
btVector3 angVelA = bodyA.getAngularVelocity();
btVector3 angVelB = bodyB.getAngularVelocity();
{
btVector3 ax1 = trA.getBasis()*hinge->getFrameOffsetA().getBasis().getColumn(2);
btScalar vel = angVelA.dot(ax1);
vel -= angVelB.dot(ax1);
printf("hinge velocity (q) = %f\n", vel);
actualHingeVelocity=vel;
}
btVector3 ortho0,ortho1;
btPlaneSpace1(btAxisA,ortho0,ortho1);
{
btScalar vel2 = angVelA.dot(ortho0);
vel2 -= angVelB.dot(ortho0);
printf("hinge orthogonal1 velocity (q) = %f\n", vel2);
}
{
btScalar vel0 = angVelA.dot(ortho1);
vel0 -= angVelB.dot(ortho1);
printf("hinge orthogonal0 velocity (q) = %f\n", vel0);
}
}
}
}
void ConstraintPhysicsSetup::initPhysics()
{
m_guiHelper->setUpAxis(1);
createEmptyDynamicsWorld();
m_guiHelper->createPhysicsDebugDrawer(m_dynamicsWorld);
int mode = btIDebugDraw::DBG_DrawWireframe
+btIDebugDraw::DBG_DrawConstraints
+btIDebugDraw::DBG_DrawConstraintLimits;
m_dynamicsWorld->getDebugDrawer()->setDebugMode(mode);
{
SliderParams slider("target vel",&targetVel);
slider.m_minVal=-4;
slider.m_maxVal=4;
m_guiHelper->getParameterInterface()->registerSliderFloatParameter(slider);
}
{
SliderParams slider("max impulse",&maxImpulse);
slider.m_minVal=0;
slider.m_maxVal=1000;
m_guiHelper->getParameterInterface()->registerSliderFloatParameter(slider);
}
{
SliderParams slider("actual vel",&actualHingeVelocity);
slider.m_minVal=-4;
slider.m_maxVal=4;
m_guiHelper->getParameterInterface()->registerSliderFloatParameter(slider);
}
val=1.f;
{
SliderParams slider("angle",&val);
slider.m_minVal=-720;
slider.m_maxVal=720;
m_guiHelper->getParameterInterface()->registerSliderFloatParameter(slider);
}
{ // create a door using hinge constraint attached to the world
btCollisionShape* pDoorShape = new btBoxShape(btVector3(2.0f, 5.0f, 0.2f));
m_collisionShapes.push_back(pDoorShape);
btTransform doorTrans;
doorTrans.setIdentity();
doorTrans.setOrigin(btVector3(-5.0f, -2.0f, 0.0f));
btRigidBody* pDoorBody = createRigidBody( 1.0, doorTrans, pDoorShape);
pDoorBody->setActivationState(DISABLE_DEACTIVATION);
const btVector3 btPivotA(10.f + 2.1f, -2.0f, 0.0f ); // right next to the door slightly outside
spDoorHinge = new btHingeAccumulatedAngleConstraint( *pDoorBody, btPivotA, btAxisA );
m_dynamicsWorld->addConstraint(spDoorHinge);
spDoorHinge->setDbgDrawSize(btScalar(5.f));
}
m_guiHelper->autogenerateGraphicsObjects(m_dynamicsWorld);
}
class ExampleInterface* ConstraintCreateFunc(struct PhysicsInterface* pint, struct GUIHelperInterface* helper, int option)
{
return new ConstraintPhysicsSetup(helper);
}

6
examples/Constraints/ConstraintPhysicsSetup.h Normal file
View File

@@ -0,0 +1,6 @@
#ifndef CONSTAINT_PHYSICS_SETUP_H
#define CONSTAINT_PHYSICS_SETUP_H
class ExampleInterface* ConstraintCreateFunc(struct PhysicsInterface* pint, struct GUIHelperInterface* helper, int option);
#endif //CONSTAINT_PHYSICS_SETUP_H

479
examples/Constraints/Dof6Spring2Setup.cpp Normal file
View File

@@ -0,0 +1,479 @@
#include "Dof6Spring2Setup.h"
#include "btBulletDynamicsCommon.h"
#include "BulletDynamics/ConstraintSolver/btNNCGConstraintSolver.h"
#include "BulletDynamics/MLCPSolvers/btMLCPSolver.h"
#include "BulletDynamics/MLCPSolvers/btSolveProjectedGaussSeidel.h"
#include "BulletDynamics/MLCPSolvers/btLemkeSolver.h"
#include "BulletDynamics/MLCPSolvers/btDantzigSolver.h"
#include "BulletDynamics/ConstraintSolver/btGeneric6DofSpring2Constraint.h"
#ifndef M_PI
#define M_PI 3.14159265358979323846
#endif
#ifndef M_PI_2
#define M_PI_2 1.57079632679489661923
#endif
#ifndef M_PI_4
#define M_PI_4 0.785398163397448309616
#endif
extern float g_additionalBodyMass;
//comment this out to compare with original spring constraint
#define USE_6DOF2
#ifdef USE_6DOF2
#define CONSTRAINT_TYPE btGeneric6DofSpring2Constraint
#define EXTRAPARAMS
#else
#define CONSTRAINT_TYPE btGeneric6DofSpringConstraint
#define EXTRAPARAMS ,true
#endif
#include "../CommonInterfaces/CommonRigidBodyBase.h"
struct Dof6Spring2Setup : public CommonRigidBodyBase
{
struct Dof6Spring2SetupInternalData* m_data;
Dof6Spring2Setup(struct GUIHelperInterface* helper);
virtual ~Dof6Spring2Setup();
virtual void initPhysics();
virtual void stepSimulation(float deltaTime);
void animate();
};
struct Dof6Spring2SetupInternalData
{
btRigidBody* m_TranslateSpringBody;
btRigidBody* m_TranslateSpringBody2;
btRigidBody* m_RotateSpringBody;
btRigidBody* m_RotateSpringBody2;
btRigidBody* m_BouncingTranslateBody;
btRigidBody* m_MotorBody;
btRigidBody* m_ServoMotorBody;
btRigidBody* m_ChainLeftBody;
btRigidBody* m_ChainRightBody;
CONSTRAINT_TYPE* m_ServoMotorConstraint;
CONSTRAINT_TYPE* m_ChainLeftConstraint;
CONSTRAINT_TYPE* m_ChainRightConstraint;
float mDt;
unsigned int frameID;
Dof6Spring2SetupInternalData()
: mDt(1./60.),frameID(0)
{
}
};
Dof6Spring2Setup::Dof6Spring2Setup(struct GUIHelperInterface* helper)
:CommonRigidBodyBase(helper)
{
m_data = new Dof6Spring2SetupInternalData;
}
Dof6Spring2Setup::~Dof6Spring2Setup()
{
exitPhysics();
delete m_data;
}
void Dof6Spring2Setup::initPhysics()
{
// Setup the basic world
m_collisionConfiguration = new btDefaultCollisionConfiguration();
m_dispatcher = new btCollisionDispatcher(m_collisionConfiguration);
btVector3 worldAabbMin(-10000,-10000,-10000);
btVector3 worldAabbMax(10000,10000,10000);
m_broadphase = new btAxisSweep3 (worldAabbMin, worldAabbMax);
/////// uncomment the corresponding line to test a solver.
//m_solver = new btSequentialImpulseConstraintSolver;
m_solver = new btNNCGConstraintSolver;
//m_solver = new btMLCPSolver(new btSolveProjectedGaussSeidel());
//m_solver = new btMLCPSolver(new btDantzigSolver());
//m_solver = new btMLCPSolver(new btLemkeSolver());
m_dynamicsWorld = new btDiscreteDynamicsWorld(m_dispatcher,m_broadphase,m_solver,m_collisionConfiguration);
m_dynamicsWorld->getDispatchInfo().m_useContinuous = true;
m_dynamicsWorld->setGravity(btVector3(0,0,0));
// Setup a big ground box
{
btCollisionShape* groundShape = new btBoxShape(btVector3(btScalar(200.),btScalar(5.),btScalar(200.)));
btTransform groundTransform;
groundTransform.setIdentity();
groundTransform.setOrigin(btVector3(0,-10,0));
#define CREATE_GROUND_COLLISION_OBJECT 1
#ifdef CREATE_GROUND_COLLISION_OBJECT
btCollisionObject* fixedGround = new btCollisionObject();
fixedGround->setCollisionShape(groundShape);
fixedGround->setWorldTransform(groundTransform);
m_dynamicsWorld->addCollisionObject(fixedGround);
#else
localCreateRigidBody(btScalar(0.),groundTransform,groundShape);
#endif //CREATE_GROUND_COLLISION_OBJECT
}
m_dynamicsWorld->getSolverInfo().m_numIterations = 100;
btCollisionShape* shape;
btVector3 localInertia(0,0,0);
btDefaultMotionState* motionState;
btTransform bodyTransform;
btScalar mass;
btTransform localA;
btTransform localB;
CONSTRAINT_TYPE* constraint;
//static body centered in the origo
mass = 0.0;
shape= new btBoxShape(btVector3(0.5,0.5,0.5));
localInertia = btVector3(0,0,0);
bodyTransform.setIdentity();
motionState = new btDefaultMotionState(bodyTransform);
btRigidBody* staticBody = new btRigidBody(mass,motionState,shape,localInertia);
/////////// box with undamped translate spring attached to static body
/////////// the box should oscillate left-to-right forever
{
mass = 1.0;
shape= new btBoxShape(btVector3(0.5,0.5,0.5));
shape->calculateLocalInertia(mass,localInertia);
bodyTransform.setIdentity();
bodyTransform.setOrigin(btVector3(-2,0,-5));
motionState = new btDefaultMotionState(bodyTransform);
m_data->m_TranslateSpringBody = new btRigidBody(mass,motionState,shape,localInertia);
m_data->m_TranslateSpringBody->setActivationState(DISABLE_DEACTIVATION);
m_dynamicsWorld->addRigidBody(m_data->m_TranslateSpringBody);
localA.setIdentity();localA.getOrigin() = btVector3(0,0,-5);
localB.setIdentity();
constraint = new CONSTRAINT_TYPE(*staticBody, *m_data->m_TranslateSpringBody, localA, localB EXTRAPARAMS);
constraint->setLimit(0, 1,-1);
constraint->setLimit(1, 0, 0);
constraint->setLimit(2, 0, 0);
constraint->setLimit(3, 0, 0);
constraint->setLimit(4, 0, 0);
constraint->setLimit(5, 0, 0);
constraint->enableSpring(0, true);
constraint->setStiffness(0, 100);
#ifdef USE_6DOF2
constraint->setDamping(0, 0);
#else
constraint->setDamping(0, 1);
#endif
constraint->setEquilibriumPoint(0, 0);
m_dynamicsWorld->addConstraint(constraint, true);
}
/////////// box with rotate spring, attached to static body
/////////// box should swing (rotate) left-to-right forever
{
mass = 1.0;
shape= new btBoxShape(btVector3(0.5,0.5,0.5));
shape->calculateLocalInertia(mass,localInertia);
bodyTransform.setIdentity();
bodyTransform.getBasis().setEulerZYX(0,0,M_PI_2);
motionState = new btDefaultMotionState(bodyTransform);
m_data->m_RotateSpringBody = new btRigidBody(mass,motionState,shape,localInertia);
m_data->m_RotateSpringBody->setActivationState(DISABLE_DEACTIVATION);
m_dynamicsWorld->addRigidBody(m_data->m_RotateSpringBody);
localA.setIdentity();localA.getOrigin() = btVector3(0,0,0);
localB.setIdentity();localB.setOrigin(btVector3(0,0.5,0));
constraint = new CONSTRAINT_TYPE(*staticBody, *m_data->m_RotateSpringBody, localA, localB EXTRAPARAMS);
constraint->setLimit(0, 0, 0);
constraint->setLimit(1, 0, 0);
constraint->setLimit(2, 0, 0);
constraint->setLimit(3, 0, 0);
constraint->setLimit(4, 0, 0);
constraint->setLimit(5, 1, -1);
constraint->enableSpring(5, true);
constraint->setStiffness(5, 100);
#ifdef USE_6DOF2
constraint->setDamping(5, 0);
#else
constraint->setDamping(5, 1);
#endif
constraint->setEquilibriumPoint(0, 0);
m_dynamicsWorld->addConstraint(constraint, true);
}
/////////// box with bouncing constraint, translation is bounced at the positive x limit, but not at the negative limit
/////////// bouncing can not be set independently at low and high limits, so two constraints will be created: one that defines the low (non bouncing) limit, and one that defines the high (bouncing) limit
/////////// the box should move to the left (as an impulse will be applied to it periodically) until it reaches its limit, then bounce back
{
mass = 1.0;
shape= new btBoxShape(btVector3(0.5,0.5,0.5));
shape->calculateLocalInertia(mass,localInertia);
bodyTransform.setIdentity();
bodyTransform.setOrigin(btVector3(0,0,-3));
motionState = new btDefaultMotionState(bodyTransform);
m_data->m_BouncingTranslateBody = new btRigidBody(mass,motionState,shape,localInertia);
m_data->m_BouncingTranslateBody->setActivationState(DISABLE_DEACTIVATION);
m_data->m_BouncingTranslateBody->setDeactivationTime(btScalar(20000000));
m_dynamicsWorld->addRigidBody(m_data->m_BouncingTranslateBody);
localA.setIdentity();localA.getOrigin() = btVector3(0,0,0);
localB.setIdentity();
constraint = new CONSTRAINT_TYPE(*staticBody, *m_data->m_BouncingTranslateBody, localA, localB EXTRAPARAMS);
constraint->setLimit(0, -2, SIMD_INFINITY);
constraint->setLimit(1, 0, 0);
constraint->setLimit(2, -3, -3);
constraint->setLimit(3, 0, 0);
constraint->setLimit(4, 0, 0);
constraint->setLimit(5, 0, 0);
#ifdef USE_6DOF2
constraint->setBounce(0,0);
#else //bounce is named restitution in 6dofspring, but not implemented for translational limit motor, so the following line has no effect
constraint->getTranslationalLimitMotor()->m_restitution = 0.0;
#endif
constraint->setParam(BT_CONSTRAINT_STOP_ERP,0.995,0);
constraint->setParam(BT_CONSTRAINT_STOP_CFM,0.0,0);
m_dynamicsWorld->addConstraint(constraint, true);
constraint = new CONSTRAINT_TYPE(*staticBody, *m_data->m_BouncingTranslateBody, localA, localB EXTRAPARAMS);
constraint->setLimit(0, -SIMD_INFINITY, 2);
constraint->setLimit(1, 0, 0);
constraint->setLimit(2, -3, -3);
constraint->setLimit(3, 0, 0);
constraint->setLimit(4, 0, 0);
constraint->setLimit(5, 0, 0);
#ifdef USE_6DOF2
constraint->setBounce(0,1);
#else //bounce is named restitution in 6dofspring, but not implemented for translational limit motor, so the following line has no effect
constraint->getTranslationalLimitMotor()->m_restitution = 1.0;
#endif
constraint->setParam(BT_CONSTRAINT_STOP_ERP,0.995,0);
constraint->setParam(BT_CONSTRAINT_STOP_CFM,0.0,0);
m_dynamicsWorld->addConstraint(constraint, true);
}
/////////// box with rotational motor, attached to static body
/////////// the box should rotate around the y axis
{
mass = 1.0;
shape= new btBoxShape(btVector3(0.5,0.5,0.5));
shape->calculateLocalInertia(mass,localInertia);
bodyTransform.setIdentity();
bodyTransform.setOrigin(btVector3(4,0,0));
motionState = new btDefaultMotionState(bodyTransform);
m_data->m_MotorBody = new btRigidBody(mass,motionState,shape,localInertia);
m_data->m_MotorBody->setActivationState(DISABLE_DEACTIVATION);
m_dynamicsWorld->addRigidBody(m_data->m_MotorBody);
localA.setIdentity();localA.getOrigin() = btVector3(4,0,0);
localB.setIdentity();
constraint = new CONSTRAINT_TYPE(*staticBody, *m_data->m_MotorBody, localA, localB EXTRAPARAMS);
constraint->setLimit(0, 0, 0);
constraint->setLimit(1, 0, 0);
constraint->setLimit(2, 0, 0);
constraint->setLimit(3, 0, 0);
constraint->setLimit(4, 0, 0);
constraint->setLimit(5, 1,-1);
#ifdef USE_6DOF2
constraint->enableMotor(5,true);
constraint->setTargetVelocity(5,3.f);
constraint->setMaxMotorForce(5,10.f);
#else
constraint->getRotationalLimitMotor(2)->m_enableMotor = true;
constraint->getRotationalLimitMotor(2)->m_targetVelocity = 3.f;
constraint->getRotationalLimitMotor(2)->m_maxMotorForce = 10;
#endif
m_dynamicsWorld->addConstraint(constraint, true);
}
/////////// box with rotational servo motor, attached to static body
/////////// the box should rotate around the y axis until it reaches its target
/////////// the target will be negated periodically
{
mass = 1.0;
shape= new btBoxShape(btVector3(0.5,0.5,0.5));
shape->calculateLocalInertia(mass,localInertia);
bodyTransform.setIdentity();
bodyTransform.setOrigin(btVector3(7,0,0));
motionState = new btDefaultMotionState(bodyTransform);
m_data->m_ServoMotorBody = new btRigidBody(mass,motionState,shape,localInertia);
m_data->m_ServoMotorBody->setActivationState(DISABLE_DEACTIVATION);
m_dynamicsWorld->addRigidBody(m_data->m_ServoMotorBody);
localA.setIdentity();localA.getOrigin() = btVector3(7,0,0);
localB.setIdentity();
constraint = new CONSTRAINT_TYPE(*staticBody, *m_data->m_ServoMotorBody, localA, localB EXTRAPARAMS);
constraint->setLimit(0, 0, 0);
constraint->setLimit(1, 0, 0);
constraint->setLimit(2, 0, 0);
constraint->setLimit(3, 0, 0);
constraint->setLimit(4, 0, 0);
constraint->setLimit(5, 1,-1);
#ifdef USE_6DOF2
constraint->enableMotor(5,true);
constraint->setTargetVelocity(5,3.f);
constraint->setMaxMotorForce(5,10.f);
constraint->setServo(5,true);
constraint->setServoTarget(5, M_PI_2);
#else
constraint->getRotationalLimitMotor(2)->m_enableMotor = true;
constraint->getRotationalLimitMotor(2)->m_targetVelocity = 3.f;
constraint->getRotationalLimitMotor(2)->m_maxMotorForce = 10;
//servo motor is not implemented in 6dofspring constraint
#endif
m_dynamicsWorld->addConstraint(constraint, true);
m_data->m_ServoMotorConstraint = constraint;
}
////////// chain of boxes linked together with fully limited rotational and translational constraints
////////// the chain will be pulled to the left and to the right periodically. They should strictly stick together.
{
btScalar limitConstraintStrength = 0.6;
int bodycount = 10;
btRigidBody* prevBody = 0;
for(int i = 0; i < bodycount; ++i)
{
mass = 1.0;
shape= new btBoxShape(btVector3(0.5,0.5,0.5));
shape->calculateLocalInertia(mass,localInertia);
bodyTransform.setIdentity();
bodyTransform.setOrigin(btVector3(- i,0,3));
motionState = new btDefaultMotionState(bodyTransform);
btRigidBody* body = new btRigidBody(mass,motionState,shape,localInertia);
body->setActivationState(DISABLE_DEACTIVATION);
m_dynamicsWorld->addRigidBody(body);
if(prevBody != 0)
{
localB.setIdentity();
localB.setOrigin(btVector3(0.5,0,0));
btTransform localA;
localA.setIdentity();
localA.setOrigin(btVector3(-0.5,0,0));
CONSTRAINT_TYPE* constraint = new CONSTRAINT_TYPE(*prevBody, *body, localA, localB EXTRAPARAMS);
constraint->setLimit(0, -0.01, 0.01);
constraint->setLimit(1, 0, 0);
constraint->setLimit(2, 0, 0);
constraint->setLimit(3, 0, 0);
constraint->setLimit(4, 0, 0);
constraint->setLimit(5, 0, 0);
for(int a = 0; a < 6; ++a)
{
constraint->setParam(BT_CONSTRAINT_STOP_ERP,0.9,a);
constraint->setParam(BT_CONSTRAINT_STOP_CFM,0.0,a);
}
m_dynamicsWorld->addConstraint(constraint, true);
if(i < bodycount - 1)
{
localA.setIdentity();localA.getOrigin() = btVector3(0,0,3);
localB.setIdentity();
CONSTRAINT_TYPE* constraintZY = new CONSTRAINT_TYPE(*staticBody, *body, localA, localB EXTRAPARAMS);
constraintZY->setLimit(0, 1, -1);
m_dynamicsWorld->addConstraint(constraintZY, true);
}
}
else
{
localA.setIdentity();localA.getOrigin() = btVector3(bodycount,0,3);
localB.setIdentity();
localB.setOrigin(btVector3(0,0,0));
m_data->m_ChainLeftBody = body;
m_data->m_ChainLeftConstraint = new CONSTRAINT_TYPE(*staticBody, *body, localA, localB EXTRAPARAMS);
m_data->m_ChainLeftConstraint->setLimit(3,0,0);
m_data->m_ChainLeftConstraint->setLimit(4,0,0);
m_data->m_ChainLeftConstraint->setLimit(5,0,0);
for(int a = 0; a < 6; ++a)
{
m_data->m_ChainLeftConstraint->setParam(BT_CONSTRAINT_STOP_ERP,limitConstraintStrength,a);
m_data->m_ChainLeftConstraint->setParam(BT_CONSTRAINT_STOP_CFM,0.0,a);
}
m_dynamicsWorld->addConstraint(m_data->m_ChainLeftConstraint, true);
}
prevBody = body;
}
m_data->m_ChainRightBody = prevBody;
localA.setIdentity();localA.getOrigin() = btVector3(-bodycount,0,3);
localB.setIdentity();
localB.setOrigin(btVector3(0,0,0));
m_data->m_ChainRightConstraint = new CONSTRAINT_TYPE(*staticBody, *m_data->m_ChainRightBody, localA, localB EXTRAPARAMS);
m_data->m_ChainRightConstraint->setLimit(3,0,0);
m_data->m_ChainRightConstraint->setLimit(4,0,0);
m_data->m_ChainRightConstraint->setLimit(5,0,0);
for(int a = 0; a < 6; ++a)
{
m_data->m_ChainRightConstraint->setParam(BT_CONSTRAINT_STOP_ERP,limitConstraintStrength,a);
m_data->m_ChainRightConstraint->setParam(BT_CONSTRAINT_STOP_CFM,0.0,a);
}
}
m_guiHelper->autogenerateGraphicsObjects(m_dynamicsWorld);
}
void Dof6Spring2Setup::animate()
{
/////// servo motor: flip its target periodically
#ifdef USE_6DOF2
static float servoNextFrame = -1;
btScalar pos = m_data->m_ServoMotorConstraint->getRotationalLimitMotor(2)->m_currentPosition;
btScalar target = m_data->m_ServoMotorConstraint->getRotationalLimitMotor(2)->m_servoTarget;
if(servoNextFrame < 0)
{
m_data->m_ServoMotorConstraint->getRotationalLimitMotor(2)->m_servoTarget *= -1;
servoNextFrame = 3.0;
}
servoNextFrame -= m_data->mDt;
#endif
/////// constraint chain: pull the chain left and right periodically
static float chainNextFrame = -1;
static bool left = true;
if(chainNextFrame < 0)
{
if(!left)
{
m_data->m_ChainRightBody->setActivationState(ACTIVE_TAG);
m_dynamicsWorld->removeConstraint(m_data->m_ChainRightConstraint);
m_dynamicsWorld->addConstraint(m_data->m_ChainLeftConstraint, true);
}
else
{
m_data->m_ChainLeftBody->setActivationState(ACTIVE_TAG);
m_dynamicsWorld->removeConstraint(m_data->m_ChainLeftConstraint);
m_dynamicsWorld->addConstraint(m_data->m_ChainRightConstraint, true);
}
chainNextFrame = 3.0;
left = !left;
}
chainNextFrame -= m_data->mDt;
/////// bouncing constraint: push the box periodically
m_data->m_BouncingTranslateBody->setActivationState(ACTIVE_TAG);
static float bounceNextFrame = -1;
if(bounceNextFrame < 0)
{
m_data->m_BouncingTranslateBody->applyCentralImpulse(btVector3(10,0,0));
bounceNextFrame = 3.0;
}
bounceNextFrame -= m_data->mDt;
m_data->frameID++;
}
void Dof6Spring2Setup::stepSimulation(float deltaTime)
{
animate();
m_dynamicsWorld->stepSimulation(deltaTime);
}
class ExampleInterface* Dof6Spring2CreateFunc(struct PhysicsInterface* pint, struct GUIHelperInterface* helper, int option)
{
return new Dof6Spring2Setup(helper);
}

6
examples/Constraints/Dof6Spring2Setup.h Normal file
View File

@@ -0,0 +1,6 @@
#ifndef GENERIC_6DOF_SPRING2_CONSTRAINT_DEMO_H
#define GENERIC_6DOF_SPRING2_CONSTRAINT_DEMO_H
class ExampleInterface* Dof6Spring2CreateFunc(struct PhysicsInterface* pint, struct GUIHelperInterface* helper, int option);
#endif //GENERIC_6DOF_SPRING2_CONSTRAINT_DEMO_H