## Assume you have run vr_kuka_setup and have default scene set up
# Require p.setInternalSimFlags(0) in kuka_setup
import pybullet as p
import math
# import numpy as np

p.connect(p.SHARED_MEMORY)

kuka = 3
kuka_gripper = 7
POSITION = 1
ORIENTATION = 2
ANALOG=3
BUTTONS = 6


THRESHOLD = .5
LOWER_LIMITS = [-.967, -2.0, -2.96, 0.19, -2.96, -2.09, -3.05]
UPPER_LIMITS = [.96, 2.0, 2.96, 2.29, 2.96, 2.09, 3.05]
JOINT_RANGE = [5.8, 4, 5.8, 4, 5.8, 4, 6]
REST_POSE = [0, 0, 0, math.pi / 2, 0, -math.pi * 0.66, 0]
JOINT_DAMP = [0.1]*10
REST_JOINT_POS = [-0., -0., 0., 1.570793, 0., -1.036725, 0.000001]
MAX_FORCE = 500
KUKA_GRIPPER_REST_POS = [0., -0.011130, -0.206421, 0.205143, -0.009999, 0., -0.010055, 0.]
KUKA_GRIPPER_CLOZ_POS = [0.0, -0.047564246423083795, 0.6855956234759611, -0.7479294372303137, 0.05054599996976922, 0.0, 0.049838105678835724, 0.0]

def euc_dist(posA, posB):
	dist = 0.
	for i in range(len(posA)):
		dist += (posA[i] - posB[i]) ** 2
	return dist

p.setRealTimeSimulation(1)

controllers = [e[0] for e in p.getVREvents()]

for j in range(p.getNumJoints(kuka_gripper)):
	print(p.getJointInfo(kuka_gripper,j))
while True:

	events = p.getVREvents()
	for e in (events):

		# Only use one controller
		###########################################
		# This is important: make sure there's only one VR Controller!
		if e[0] == controllers[0]:
			break

		sq_len = euc_dist(p.getLinkState(kuka, 6)[0], e[POSITION])

		# A simplistic version of gripper control
		#@TO-DO: Add slider for the gripper
		
		
		
		#for i in range(p.getNumJoints(kuka_gripper)):
		i=4
		p.setJointMotorControl2(kuka_gripper, i, p.POSITION_CONTROL, targetPosition=e[ANALOG]*0.05, force=10)
		i=6
		p.setJointMotorControl2(kuka_gripper, i, p.POSITION_CONTROL, targetPosition=e[ANALOG]*0.05, force=10)

		
		if sq_len < THRESHOLD * THRESHOLD:
			eef_pos = e[POSITION]
			eef_orn = p.getQuaternionFromEuler([0,-math.pi,0])
			joint_pos = p.calculateInverseKinematics(kuka, 6, eef_pos, eef_orn,
				lowerLimits=LOWER_LIMITS, upperLimits=UPPER_LIMITS, 
				jointRanges=JOINT_RANGE, restPoses=REST_POSE, jointDamping=JOINT_DAMP)

			
			for i in range(len(joint_pos)):
				p.setJointMotorControl2(kuka, i, p.POSITION_CONTROL, 
					targetPosition=joint_pos[i], targetVelocity=0, positionGain=0.15, 
					velocityGain=1.0, force=MAX_FORCE)
	

		else:
			# Set back to original rest pose
			for jointIndex in range(p.getNumJoints(kuka)):
				p.setJointMotorControl2(kuka, jointIndex, p.POSITION_CONTROL, 
					REST_JOINT_POS[jointIndex], 0)