ejcoumans
23a197b3dc
add alignment for broadphase proxy/handle. need to benchmark this, and check it doesn't degrade the performance on other platforms. Otherwise make it conditional only when USE_LIBSPE2 is defined
2007-10-03 00:41:55 +00:00
ejcoumans
b6cd61a5e1
preparation for multi SAP broadphase
2007-08-03 01:39:36 +00:00
ejcoumans
1f7646f72a
Refactoring to enable multi SAP broadphase.
...
This was already planned, and Pierre Terdiman recent thread motivated me to decouple the paircache from the sweep and prune.
http://continuousphysics.com/Bullet/phpBB2/viewtopic.php?t=1329
2007-08-02 23:48:46 +00:00
ejcoumans
177b6f5ce2
Added btUniformScalingShape (including support for debug rendering etc)
...
This allows to re-use a convex shape, while each instance can re-scale it (with a uniform scalar factor)
2007-07-28 19:20:45 +00:00
ejcoumans
685138d033
include paths should not be relative starting with "../
...
It leads to problems with certain compilers, when Bullet/src is located in a long pathname.
Keep include path starting with "LinearMath/, "BulletCollision/, or "BulletDynamics/
2007-07-14 05:08:57 +00:00
ejcoumans
bc3f9535ad
cleaned up, removed warning under MSVC2005 (Level 4)
...
Mostly related to alignment and unused variables
2007-04-13 01:37:21 +00:00
ejcoumans
853bafb7ae
Get the open source Bullet library more in sync with Playstation SPU version
2007-04-10 01:02:58 +00:00
ejcoumans
cef39974e1
fixed some enum issue (comma at last entry)
2007-03-21 18:51:40 +00:00
ejcoumans
054d672592
- removed STL from the Bullet library: replace std::vector by btAlignedObjectArray. Also removed the std::set for overlapping pair set, and turned it into an overlapping pair array. The SAP only adds objects, never removed. Removal is postponed for during traversal of overlapping pairs (duplicates and non-overlapping pairs are removed during that traversal).
...
- added heap sort and binary search/linear search to btAlignedObjectArray
- fixed wrong cast, thanks Hamstray, http://www.continuousphysics.com/Bullet/phpBB2/viewtopic.php?t=1015
2007-03-06 09:59:17 +00:00
ejcoumans
581468ceec
Added btCapsuleShape. This could already be simulated by simply adding 2 spheres to the btMultiSphereShape, but this was bad documented/unknown.
...
For tapered capsules, you can still use btMultiSphereShape, just pass 2 spheres with different radius.
2007-01-30 00:09:08 +00:00
ejcoumans
b6d1b4c94e
Added btNearCallback. This is similar to Open Dynamics Engine (ODE) dNearCallback, but important differences:
...
- contact points are persistent (lifetime more then one frame, for warmstarting/incremental contact point management)
- continuous collision detection, time of impact
Added btRigidBody::isInWorld(), returns true if btRigidBody is inside a btCollisionWorld/btDynamicsWorld derived class
Added angularFactor to btRigidbody, this helps some character control (no angular impulse applied)
2006-12-04 15:42:03 +00:00
ejcoumans
71145de242
renamed ConcaveShape to btConcaveShape
...
added btHeightfieldTerrainShape (not done yet)
2006-11-29 02:11:25 +00:00
ejcoumans
a9172d8684
Added GIMPACT integration for moving concave meshes (interaction with all other Bullet collision shapes)
...
Thanks a lot to Francisco León Nájera for the contribution!
2006-11-12 06:15:19 +00:00
ejcoumans
3fe3b11924
use Dispatcher in ConcaveConvexCollisionAlgorithm (so it uses the registered collision algorithm, not hardcoded convexconcave)
...
improved performance of constraint solver by precalculating the cross product/impulse arm
added collision comparison code: ODE box-box, also sphere-triangle
added safety check into GJK, and an assert for AABB's that are very large
write partid/triangle index outside of GJK
2006-10-28 02:06:19 +00:00
ejcoumans
323a1046fd
Cleaned up/simplified construction of a btRigidBody
...
Fixed memoryleak in btOptimizedBvh (delete []m_contiguousNodes;)
Changed DemoApplication::localCreateRigidBody, so it adds the rigidbody to the btDynamicsWorld.
Added check for duplicate objects in world when adding.
Added assert to prevent setLinearVelocity on static rigidbodies
Added btCollisionFilterGroups to btBroadphaseProxy
removed duplicate 'btBroadphaseProxy* m_broadphaseProxy;' in btRigidBody
2006-10-04 23:46:27 +00:00
ejcoumans
21482e4cab
some minor comment-renames, and moved some data from box/sphere into common convex.
2006-09-28 20:14:10 +00:00
ejcoumans
2b1657b1dd
Refactoring: another huge number of changes, renamed methods to start with lower-case.
2006-09-28 01:11:16 +00:00
ejcoumans
eb23bb5c0c
merged most of the changes from the branch into trunk, except for COLLADA, libxml and glut glitches.
...
Still need to verify to make sure no unwanted renaming is introduced.
2006-09-27 20:43:51 +00:00
ejcoumans
0e04cfc806
First stage in refactoring Bullet: moved Bullet Collision and Dynamics and LinearMath into src folder, and all files in Collision Detection and Dynamics have bt prefix.
...
Made all buildsystems to work again (jam, msvc, cmake)
2006-09-25 08:58:57 +00:00
